Bucket Elevator
Capacity(m³/h): Based on the need of clients
Bucket capacity(L): 0.5~5 or customized
Speed of bucket(m/s): 0.5
Bucket width(mm): 100~650 or customized
Material: SS304,Carbon steel
Conveying height(m): 1~60 can be customized
Price(USD): 2500~30000
- Description
- Inquiry
Description
What is Bucket Elevator?
Bucket elevator is composed of hoist, lower sprocket, belt, bucket, screw, feed inlet and outlet, box, motor reducer, and so on. It is suitable for lifting from low to high, after the material is put into the hopper through the shaking table, the machine automatically and continuously runs upward to transport it. The transmission speed can be adjusted according to the transmission volume, and the lifting height can be selected as needed. It has the advantages of large throughput, high lifting height, stable and reliable operation, and long service life.
This hoist is suitable for conveying powdery, granular, and small blocks without grinding cut and grinding cut small materials, such as coal, cement, stone, sand, clay, ore, and so on.
The advantage of Bucket Elevator
1. Stable and reliable operation.
2. Good rigidity and low operation cost.
3. Flow-type feed, gravity-induced unloading.
4. Wide lifting range and large transmission capacity.
5. Long service life and excellent sealing performance.
6. Convenient operation and maintenance with a compact structure.
7. The lifting system is very stable, low noise, and lift material up to 250°C.
8. The conveying capacity is more than 20% higher than other models.
9. The lifting chain has the characteristics of high tensile strength, good wear resistance, and so on.
How to choose the right Bucket Elevator?
Generally, the decision of the bucket elevator depends on these factors: 1. The form of the material: whether the material is powder or granular or small block. 2. Physical properties of the material: whether the material has adsorption or viscosity, and whether it contains water. 3. Proportion of materials: generally, the parameters of the bucket elevator are designed and calculated for materials accumulation proportion below 1.6. If the specific gravity of materials is too large, the calculation of the tensile strength of the traction and transmission parts is required. 4. The amount of delivery per unit time.
If you need a machine, contact us.
